Benefits

• Most Importantly, immediate reduction of hydro costs
• Automatic By-pass bulit in
• Existing ballast, fixtures or lamps do not require replacment
• Extends life expentancy of bulbs between 30 to 45%
• LDC is compact and small is size taking limited space
• Installation is quick, easy and requires minimal adoption to existing equipment
• LDC unit had a display on front of the controller
   to make readings easy and quick
• LDC unit comes with an exterior
  LED display for time (am/pm), date month, hour, energy saving levels and up to 16 stage display for logic controller.
• Air conditioning load reduced from decreased
   heat from lamps and ballasts
• Environmentally friendly, reduced consumption
   of electricity equals reduced greenhouse gases generated
• Cost effective solution
• Investment return in
  approximately 12 to 30 months
• Reduce real demand and penalty charges
• Peak load incentives (contact your
  local utility for details and availabilty)
  
  

About the system

At the heart of the L.D.C unit is an intelligent microprocessor, capable of sensing the various lamp types, determining the most efficient use for each lamp type, and initiating the proper voltage for each.

The LDC unit is built with our newly patented magnetic transformer, controlled by a PLC (programmable logic controller).

This PLC enables the user to control the lighting levels while maintaining the sine wave, eliminating harmonics and maintaining the proper power factor.

L.D.C microprocessor-controlled HID Lighting Controllers have the ability to control the wattage range in different industrial lighting applications. This includes Mercury Vapor, Metal Halide, High and Low Pressure Sodium and Fluorescent lamps.

The energy savings achieved can be significant, reducing energy costs and, at the same time, helping to reduce the emission of greenhouse gasses into the environment.

LDC units are used in all applications

• Street lighting, highways, bridges, tunnels
• Parking areas, indoor and outdoor garages
• Industrial buildings, plants, warehouses, factories, large showrooms
• Hospitals, care facilities, correctional facilities, museums
• shopping malls, large retail stores, casinos
• Schools, university, colleges, educational facilities, government buildings
• Condominuims, rental properties, high-rise buildings
• Sport facilities, Ice rinks, soccer fields, baseball diamonds, curling clubs etc.
• All indoor sporting facilities (pools, tennis, fitness club etc.)

Potential energy saving per lamp

• 30 % - Compact Fluorescent/magnetic ballasts
• 20 % - Fluorescent lighting/magnetic ballasts T12 T8 high output, very high output
• 30 % - Mercury vapour
• 35 % - Low pressure sodium
• 45 % - High pressure sodium
• 50 % - Metal Halide
• 30 % - Mixed lights up to
   

Technical Information

• Standard IP21 Protection foe the panel
• Full Sinusoidal Wave
• No Harmonics
• No moving parts such as brushes, motorized drivers, solenoids
• No motorized voltage regulators
• Low voltage protection
• No PC Boards, no electronic operation, 1 Computer only
• Integrates with existing energy management systems or standalone (e.g.: RS232-RS485 Protocol)
• Input voltages available in 120v/208v 230v/400v 277v/480v 347v/600v
• Nominal output voltage step variable
• Operating temperature -35c to +45c
• Cooling fan supplied
• Protection Degree IP21-IP55
• certification: CSA/CUL/UL
• Warranty: MFG 2 year Warranty

Options Available

• 2 step up to 16 step display on logic controller
• Voltage/current input/output meter from 2 step to 16 step
• Lumen sensor, infrared sensor, motion sensor, photo cell, remote control
• IP55 protection enclosed panel
• Three different voltages in 3 separate zones simultaneously